EnviroTex Lite

Por um escritor misterioso

Descrição

EnviroTex Lite® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8 hours at 70°F, and reaches full strength and toughness in about 72 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for an attractive finish, however, two or more coats maybe applied one over the other to build additional thickness. Read all instructions prior to use. The original 1:1 epoxy coating system since 1969 Convenient 1:1 mix ratio by volume 20-30 minute working time / 8-12 hour tack-free time Full cure in 72 hours FDA Complaint (FDA 21 CFR 175.300) when accurately measured, thoroughly mixed, and fully cured. Self-levels to approximately 1/16" Produces a durable high-gloss surface coating for artwork, table

Envirotex Lite® Pour-On, High-Gloss Finish - 1 Gallon – Log Home Mart

EnviroTex Lite

® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8

EnviroTex Lite

Environmental Technology 32-Ounce Kit Lite Pour-On, High Gloss Finish — Grand River Art Supply

Use Envirotex Lite Pour-On (Resin) to refinish your table, bar top surface, or for craft projects that will result in a beautiful glass like finish., By Neil's Ace Home Center

ONE COAT APPLICATION: Get the perfect coat on your first pour! Go from 60 varnish coats to just one with EnviroTex Lite. Achieve that deep,

Environmental Technology EnviroTex Lite Pour-On High Gloss Finish [8 oz Kit] Crystal Clear Epoxy Coating for Tabletops / Countertops, Waterproof, Heat