Kevlar Shock Cord, 1/4in, 2200lb, Raw stock by the yard
Por um escritor misterioso
Descrição
This is an exceptionally high-quality Kevlar shock cord custom-made for Fruity Chutes. This conforms to Mil-Spec Kevlar standard PIA-C-87129D and
Onebadhawk recovery harness High Power Rocketry Recovery Harness / Shock Cord with 2 sewn Loops. These are made from 1/4 Tubular Kevlar.This is
1/4
Sold by the foot All shock cords are Kevlar. A general rule of thumb is for the shock cord to be at least 3 x the length of the rocket. Longer is
Kevlar / Shock Cords
Kevlar Tether 1/4 Inch - 1 Looped End
Parts for Rockets - Shock Cords - Kevlar - Elastic - Nylon - Page 1 - eRockets
Parts for Rockets - Shock Cords - Kevlar - Elastic - Nylon - Page 1 - eRockets
This simple Nomex sheath is designed to slip over your tether and restrain the pins from hitting your airframe when using inside your rocket. It also
Recovery Tether Sheath
Kevlar Cord 1500#
Irvin Recovery Systems Design Guide, PDF, Parachute
Kevlar Shock Cord, 1/4in, 2200lb, Raw stock by the yard - Fruity Chutes Inc
This is the same high-quality tubular webbing shock cord you see used often. The 11/16 cord is an exceptional quality climbing-grade cord that is
Large Shock Cord Stock, Three Sizes, Raw Stock by the Yard
Bonded Kevlar Shock Cord by the foot by Rocketry Works
Laboratory tested The loops are stronger than the cords!Loops are sewn with Kevlar thread.
Kevlar Shockloop (6 sizes)
Shock Cord 725lb Spectra Microline - Fruity Chutes Inc
Bonded Kevlar Shock Cord by the foot by Rocketry Works
Kevlar Cord
